Peerless - Running Bird
Scona Logo Tridem 50-Ton Oil Float

Tridem 50-Ton Oil Float Specifications

Description Specification
Length 48' to 53'
Width 8' 6" to 10'
Main flanges High-tensile steel
Main web High-tensile steel
Cross-members Steel I-beam on 20" centres
Suspension TA-300-U9 Watson & Chalin air ride with rebound chains
Axles D22 89" track width with spring brakes and auto slacks
Frame Tapered subframe to allow even axle weights
ABS 2S1M ABS
Hub and drums 10-stud unimount cast hubs with cast iron drums
Wheels 10-hole unimount, 22.5 x 8.25, steel
Tires 275/70R22.5 Michelin tires
Pick-up throat Full-width with p/I throat
Kingpin 2" with removable pin on 18" setting
Coupler height 54" or as required
Dolly legs Fold-down
Rear roll 8-5/8"
Kicker rolls Two short kicker rolls ahead of suspension
Pin pockets Seven standard per side, mounted outside of flange, plus one on each side in flange 4' from neck
Tie-downs At each cross-member where possible and under each outrigger
Suspension area 3" rough fir decking including gooseneck
Wheel area Covered in welded T-1 plate (load-bearing) flush to top of flanges with skirt, flush to bolster ends
Bumper Heavy-duty rear bumper
Air system Regulation MVSS system
Electrical Regulation with sealed beam rubber-mounted lights throughout, swing-out wide-load light, and four-prong long-load light
Paint Sandblasted, primed and painted with Endura plastic paint, conspicuity tape

Oilfield

Lowboy Floats