Peerless - Running Bird
Scona Logo 40- to 60-Ton Scissor Neck Lowboy

40- to 60-Ton Scissor Neck Lowboy Specifications

Description Specification
Length Approximately 53'
Width 8' 6" to 11' plus pin pockets
Working deck Approximately 25'
Main flanges High-tensile steel
Main web High-tensile steel
Cross-members Steel I-beam on 20" centres
Suspension TA-300-U9 air ride with rebound chains
Axles D22 89" track width
Hubs and drums 10-stud unimount cast hubs with cast drums
Brake pots Spring
Slacks Automatic 10-spline
Brake linings 16-1/2" x 7"
Wheels 10-hole unimount, 22.5 x 8.25, steel
Tires 275/70R22.5 radial tires
Scissor neck Full-width pick-up throat, scissor assembly to pin in two or three positions
Jeep extension Narrow Jeep extension comes with rollers
Kingpin 2" removable on 18" setting
Coupler height 54" or as required
Centre roll 7" ratchet or non-ratchet
Dolly legs Fold-down
Rear roll 8-5/8" flip-over live roll / beavertail or butt back
Booster attachment S/A pin-style booster hookup comes with removable lugs to fit Scona booster
Pin pockets Seven standard per side, mounted outside of flange, plus one each side in flange 4' from neck
Tie-downs At each cross-member where possible and under each outrigger
Floor 3" rough fir decking including gooseneck
Suspension area Covered in 2" rough fir
Wheel area Wheel area open
Air system Regulation MVSS system with scale gauge and dump valve
Electrical Regulation with LED lights throughout except mid-marker, swing-out wide-load lights, and four-prong long-load light receptacle on rear
Paint Sandblasted, primed and painted with Endura plastic paint

Additional Information

Air chuck – Air chuck in control box

Pin pockets – Four extra pin pockets at 8' 8", 8' 2" on bolsters

Oilfield

Scissornecks/Folding Necks