Peerless - Running Bird
Scona Logo 24-Wheel High-Profile Float

24-Wheel High-Profile Float Specifications

Description Specification
Length 54' overall
Width 10' 6" overall with Dayton-style wheels
Height 46" deck height
Main flanges High-tensile steel
Main web High-tensile steel
Suspension Patented 90,000 lb. fabricated air ride suspension complete with dump valve and suspension pre-gauges mounted in sealed box
Axles Ingersol F22 38" track axles with 16-1/2" x 7" S-cam brakes (rated 22,500 lb. per axle)
Hubs Six-spoke, 20"
Wheels 22.5 x 7.5 Dayton-style wheels, painted white, making unit 10' 6" wide
Tires 275/70R22.5 Michelin XTY, 18-ply
Pick-up nose Heavy-duty pick-up nose complete with tail chain anchors
Nose rollers Cast 7" rollers mounted in front nose forming behind pick-up nose on 64" and 68" centres
Pin pockets 1-5/8" ID heavy-duty pin pockets mounted on standard locations as shown in sales drawing
Tow lugs Installed at front and rear of main deck, both sides
Decking 2-1/2" dressed fir 1/4" above main rails, rough side up; 1/4" steel checker plate over outside tires
Landing gear Heavy-duty, telescopic fold-up landing legs
Live roll 10" heavy-duty full-width roll set 1" above decking with three sets of support rollers
Midship roll Twin 8" Air Lift midship ratchet rolls mounted between inner and outer rails each side with controls in sealed box
Tie-downs Tie-down brackets on 16" spacing
Booster provision Provision for tandem-axle air booster complete with air and electrical connections
Hostler valve Spring brake release valve installed in sealed box
Grease manifold Remote grease lines mounted on suspension pedestals
Cross chain Cross-chain brackets in rear bumper
Mud flaps 24" black rubber mud flaps at rear of trailer and ahead of midship rolls and control boxes; full-width rubber belting ahead of suspension area
Air system CMVSS-approved
Electrical CMVSS-approved with Truck-Lite LED seal beam tail and clearance lights; Truck-Lite LED strobe lamps mounted in rear light box assembly
Swing-out lights Front and rear of main deck complete with flag pockets
Paint Sandblasted, primed and painted with Endura plastic paint

Additional Information

Frame – 11' wide frame unimount wheels & cast hubs

Midship roll – Second set of 8" kicker rolls

Pin pockets – Additional pockets in flanges of outer tails (per pocket)

Electrical system – Backup lights at rear of trailer

Hub and drums – 10-stud unimount (long stud), 10-stud aluminum hubs complete with centrifuge brake drums

Aluminum  wheels – Alcoa 8.25 x 22.5 machined-finish wheels

Oilfield

Lowboy Floats